Tires And Wheels; Tires; Inflation Pressure; Wheels - Kubota ZG327A Operator's Manual

34

TIRES AND WHEELS

TIRES AND WHEELS

TIRES

To avoid serious injury or death:
A Do not attempt to mount a tire. This should be
done by a qualified person with the proper
equipment.
A Always maintain the correct tire pressure.
Do not inflate tires above the recommended
pressure shown in the Operator's Manual.
A Inflation pressure in front tires rises quickly
when using compressed air.
Never operate machine with a loose rim, wheel, or
axle.
A Whenever bolts are loosened, retighten to
specified torque.
A Check all bolts frequently and keep them
tightened.
BInflation Pressure
Though the inflation pressure is factory-set to the
prescribed level, it naturally drops slowly in the course of
time. Thus, check it everyday and inflate as necessary.
Tire sizes
15 x 6.0 - 6,
Front
(Non Flat Tire) Rib
26 x 12.0 - 12,
Rear
4PR Turf
(1) Ground
Recommended Inflation
Pressure
- - -
120 kPa
(1.2 kgf/cm , 17psi)
(A) "INSUFFICIENT"
(B) "NORMAL"
(C) "EXCESSIVE"

WHEELS

A When re-fitting a wheel, tighten the wheel bolt to the
following torques then recheck after traveling 200 m
(200 yards) changing directions several times.
Wheels with beveled or tapered holes:
Use the tapered wheel bolt and tapered nut.