Every 150 Hours; Changing Gear Box Oil - Kubota ZG327A Operator's Manual

EVERY 150 HOURS

BChanging Gear Box Oil
To avoid personal injury:
A Be sure to stop the engine and remove the key
before changing the oil.
If serial numbers of mower are as indicated below
RCK60P-327Z:40000 and below
RCK60R-331Z:all
1. To drain the used oil, remove the drain plug and oil
inlet plug at the gear box and drain the oil completely
into the oil pan.
2. After draining reinstall the drain plug.
3. Remove the oil level check plug.
4. Fill with the new oil up to the check plug port.
(See "LUBRICANTS AND FUEL" in "MAINTENANCE"
section.)
5. After filling reinstall the check plug and oil inlet plug
securely.
(1) Drain plug
(2) Check plug
(3) Oil inlet plug
(4) Gear case
(5) Check plug port
(A) Oil level is acceptable within
this range.
(B) Oil level
PERIODIC SERVICE
If serial numbers of mower are as indicated below
RCK60P-327Z:40001 and above
1. To drain the used oil, remove the drain plug and oil
inlet plug with gauge at the gear box and drain the oil
completely into the oil pan.
2. After draining reinstall the drain plug.
3. Remove the oil level check plug.
4. Fill with the new oil up to the check plug port.
(See "LUBRICANTS AND FUEL" in "MAINTENANCE"
section.)
5. After filling reinstall the check plug and oil inlet plug
with gauge securely.
(1) Drain plug
(2) Check plug
(3) Oil inlet plug with gauge
(4) Gear case
(5) Check plug port
67
(A) Oil level is acceptable within
this range.
(B) Oil level