Loading paper in the high-capacity cut-sheet feeder
You can load up to 150 ordinary single sheets, 25 plain bond envelopes, or
30 postcards in the high-capacity cut-sheet feeder. You can also load a
stack of single-sheet multi-part forms up to 15 mm (0.59 inch) thick in this
feeder.
Follow the steps below to load paper in the high-capacity cut-sheet feeder.
Caution:
c
Do not load carbon paper or labels in the high-capacity cut-sheet feeder.
1.
Open the paper guide cover, and set the paper release lever to the
single-sheet position. Also make sure the paper thickness lever
(located under the printer cover) is set to the proper position for
your paper's thickness.
2.
Pull down the center support.
A-6
Enhancing Your Printer With Options
center support