Epson FX-2180 User Manual page 171

6. As shown below, set the cut-sheet feeder's paper type levers to the
proper position for the paper you will load: single-sheet paper or
postcards and envelopes.
Note:
Always set the paper type levers before you load paper.
envelopes or postcards
single-sheet paper or
single-sheet multi-part
forms
7. Pull both paper set levers forward until the paper guides retract
and lock open to allow paper loading.
8. Take a stack of paper (up to 150 sheets of plain paper) and fan it.
Next, tap the side and bottom edges of the paper on a flat surface to
even up the stack.
9. Insert the paper stack printable side down along the left paper guide.
A-8
Enhancing Your Printer With Options