Loading Paper In The High-Capacity Cut-Sheet Feeder - Epson FX-880 Quick Reference

Loading paper in the high-capacity
cut-sheet feeder
1. Pull the lock levers on the edge guides
forward to release them.
2. Pull both paper set levers all the way
forward until the paper guides retract and
lock open.
3. Insert the stack of paper printable side down
along the left paper guide.
4. Adjust the right edge guide to match the
width of your paper. Then push back the
lock levers on the edge guides to lock
them in place.
5. Push back the paper set levers to clamp the
paper against the guide rollers.
6. Make sure the paper release lever is in the
single-sheet position. If you are using
ordinary paper, also make sure the paper
thickness lever is set to 0.
8
Pull the lock levers forward.
Pull both paper set levers all the way forward.
Single-sheet position
Insert the stack of paper printable side down.