Epson FX-2180 User Manual page 190

9-pin dot matrix printer
Hide thumbs Also See for FX-2180:
Table of Contents

Advertisement

Envelopes:
Size
Thickness
Weight
Postcards:
Width
Length
Thickness
Weight
Continuous paper
(standard and multi-part):
Width
Length
Copies
Thickness
Weight
(not multi-part)
Weight
(one sheet of multi-part)
Binding
Note:
Because thick multi-part forms require a straight paper path, load them in
the front slot.
C-6
Specifications
top entry only
No. 6:
165 92 mm (6.5 3.6 inches)
No. 10: 241 105 mm (9.5 4.1 inches)
0.16 to 0.52 mm (0.0063 to 0.0197 inch)
2
45 to 90 g/m
(12 to 24 lb)
front and top entry
100 to 148 mm (3.9 to 5.83 inches)
Front: 148 mm (5.83 inches)
Top: 100 to 148 mm (3.9 to 5.83 inches)
0.22 mm (0.0087 inch)
2
192 g/m
(51 lb)
front, rear, and bottom entry
101 to 406 mm (4.0 to 16.0 inches)
101 to 559 mm (4.0 to 22.0 inches)
1 original + up to 5 copies
1 original + up to 6 copies
(front or bottom entry
with the pull tractor only)
Printable area
0.065 to 0.46 mm
(0.0025 to 0.018 inch)
Perforated edges up to 0.9 mm (0.035 inch)
2
52.3 to 82 g/m
(14 to 22 lb)
2
40 to 58 g/m
(12 to 15 lb)
Point glue or paper staples on both sides
(front, bottom, or rear entry)
Point glue on only one side (rear entry only)

Advertisement

Table of Contents
loading

This manual is also suitable for:

P920b

Table of Contents