Selecting A Built-In Font And Pitch - Epson FX-2180 User Manual

Selecting a Built-In Font and Pitch

Your printer comes with the three built-in fonts shown in the
table below. You can also choose from the following six pitch
(character size) settings: 10, 12, 15, 17, or 20 cpi (characters per
inch), or proportional spacing. You can select the font and pitch
using the buttons on the printer's control panel as described
below.
Note:
Settings you make in your application programs usually override settings
you make from the printer's control panel. For best results, use your
application to select a font and pitch.
Font
Draft
Roman
Sans Serif
Follow these steps to select a built-in font or pitch using the
buttons on the printer's control panel:
1. Make sure that the printer is not printing. If it is, press the
Pause button to stop printing.
2. To select a font, press the Font button until the two Font lights
indicate the font you want as shown below.
n = On, o = Off
5-2
Changing Printer Settings From the Printer's Control Panel
Sample
Font lights
Font
Draft
o n
Roman
n o
Sans Serif
n n