Epson FX-2180 User Manual page 44

Using Windows 95 plug-and-play
If you are using Windows 95 and you want to install the driver
using plug-and-play, follow the steps below.
Note:
You can install the printer driver using plug-and-play only if your
computer has an IEEE-1284 compatible, bidirectional parallel port. See
your computer documentation for more information.
1. Make sure the printer is connected to your computer as
described on page 1-14.
2. Turn off your printer and computer, if necessary.
Caution:
c
Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise you may damage the
printer.
3. First turn on your printer and then turn on the computer.
Your computer starts loading Windows 95.
4. If you use a password, enter it at the prompt. The New
Hardware Found screen appears and displays your printer's
model name.
Note:
If you do not see the New Hardware Found screen or if a problem
occurs, click Cancel and follow the instructions under "For Windows
95 or NT 4.0" on page 1-16.
Click the Driver from disk provided by hardware
5.
manufacturer radio button.
Note:
Windows 95 may display the New Hardware Found screen again the
next time you turn on your computer. If this happens, select the Do
not install a driver radio button and then click OK . This screen
will not appear again.
Setting Up the Printer
1
1-17