Epson FX-2180 User Manual page 150

The printer does not fully eject a single sheet.
Cause
Your paper is too long.
The optional cut-sheet feeder does not feed your single-sheet
paper properly.
Cause
The cut-sheet feeder is not
installed properly.
Too many sheets are loaded in
the cut-sheet feeder.
The edge guides of the
cut-sheet feeder are not
positioned correctly.
There is only one sheet left in
the bin.
What to do
Press the Load/Eject button to eject
the sheet. Make sure the page length
of your paper is within the range
specified for single-sheet paper in
Appendix C. Also check and adjust the
paper size setting in your application
or printer driver.
What to do
Reinstall it as described in Appendix A.
Load no more than 150 single sheets in
the high-capacity cut-sheet feeder. See
"Using the Optional Cut-Sheet
Feeders" in Appendix A for more
information.
Align the left edge guide with the
arrow mark, then move the right edge
guide to match your paper's width.
Load more paper in the cut-sheet
feeder.
Troubleshooting
7
7-7