Epson FX-2180 User Manual page 100

3. Open the front paper guide by pulling the tab at the center
of the guide. Slide the left edge guide as shown below.
(Printing starts at the arrow mark.) Next adjust the right
edge guide to match the width of your paper.
4. Set the paper release lever to the single-sheet position. Also set
the paper thickness lever (located under the printer cover) to
the proper position for your paper's thickness. (See the table
on page 3-3.)
Press the Operate button to turn on the printer, if necessary.
5.
Printing on Single Sheets
3
3-11