Using The Tractor In The Pull Position - Epson FX-2180 User Manual

To remove the remaining paper from the printer, press the
Load/Eject button to feed the paper backward to the standby
position. (See the Glossary for an explanation of the standby
position.) Then open the sprocket covers of the tractor and
remove paper.
Caution:
c
Always tear off your printed document before you press the
Load/Eject button. Reverse feeding several pages at a time may
cause a paper jam.

Using the Tractor in the Pull Position

Using the tractor in the pull position is ideal for printing on
thick and heavy continuous paper, such as multi-part forms or
continuous paper with labels. However, you cannot use the
tear-off feature with the pull tractor.
You can also load paper onto the pull tractor from the rear slot.
However, doing so is not recommended because the paper
path from the rear slot is curved. Because thick paper requires
a straight paper path to avoid paper jams, it is best to load
paper in the front or bottom slot when using the pull tractor.
Caution:
c
Do not load continuous paper with labels in the rear paper slot;
the labels may come off their backing sheet inside the printer and
cause a paper jam.
To further reduce the chance of paper jams and improve the
performance of continuous paper, you can use two tractors in
combination. When using this printing method, you load your
paper onto both the front push tractor and the pull tractor, or
both the rear push tractor and the pull tractor. See "Using two
tractors in a push and pull combination" on page 2-30.
2-22
Printing on Continuous Paper