Epson FX-2180 User Manual page 66

4. Slide the left sprocket to the left margin of the paper using the
scale on the printer. (Printing starts at the "0" mark.) Then
push the lever back to lock it in place.
Note:
See "Paper alignment" and "Printable area" in Appendix C for more
information on the left margin position.
5. Slide the right sprocket to match the width of your paper, but
do not lock it. Move the paper support midway between the
two sprockets as shown above.
6. Open both sprocket covers. Make sure your paper has a
clean, straight edge and fit the first four holes of the paper,
printable side down, over the tractor pins. Then close the
sprocket covers.
7. Slide the right sprocket to remove any slack in the paper; then
lock it in place by pushing the sprocket lock down.
front of the printer
front of the printer
Printing on Continuous Paper
2
2-19