User's Guide
9. Select the authentication system name from Add. Select Epson Print Admin from Use, and then click Add.
When using drivers that are installed on the print server (Windows
only)
Select the print server to which the Epson Print Admin server is connected, and then set it up.
1. Access the print server.
Contact the system administrator for information on accessing the print server.
2. Right-click on the authentication system icon, and then select Connect.
Driver setup starts.
3. Open Control Panel > Devices and Printers.
Make sure that the Epson Print Admin or the target printer icon has been created
When you are using Group Policy (Windows only)
This is the start of your concept.
If you are using the Windows Server Group Policy, you can automatically install the driver on the user's computer.
Preparing for Use
14