Function Of Universal Plug And Play; Setting Up The Device By Using Wsd (Windows Vista) - Epson 3250 Network Manual

❏ Set the exclusive address of the DHCP function.
Note:
❏ Use NetBEUI printing if you do not want to go through these steps.
❏ See the manual of the Dial-Up router for more information on scorp range, bind, exclusive
address of the DHCP function.

Function of Universal Plug and Play

When you connect your printer to the network, the printer is automatically assigned with an IP
address, and the printer's icon appears in the My Network Places folder. By double-clicking the
printer's icon, you can access EpsonNet Config with Web Browser for basic information about the
printer, such as manufacturer, model name, location, and administrator's name.
Right-click the printer's icon in the My Network Places folder and select Properties. You can
check the brief information of the network interface.
To use this function, the Universal Plug and Play must be installed on Windows Me or future
operating systems. For information on how to install Universal Plug and Play, see the Windows
Me online help.
Note:
Before using the Universal Plug and Play function, you must enable the Universal Plug and Play
function in EpsonNet Config. See the EpsonNet Config User's Guide or "Configuring the Network
Interface Using Web-Based EpsonNet Config" on page 94.

Setting up the device by using WSD (Windows Vista)

This device supports WSD (Web Services on Devices) that is the standard protocol of Windows
Vista. You can set up a device that is already connected to the network, on your computer by using
WSD.
Note:
You should set up the network interface and install the printer driver on your computer in advance.
See "Setting Up the Network Interface" on page 35 and "Installing the Printer Driver" on page 43 for
details.
Follow the steps bellow to set up the device.
EPSON Network Guide
Tips for Administrator 129