USB I/F
Allows you to activate or deactivate the USB interface.
Buffer Size
Determines the amount of memory to be used for receiving data
and printing data. If
allocated for receiving data. If
is allocated for printing data.
Note:
To activate Buffer Size settings, you must turn off the printer for
more than five seconds then turn it back on. Or, you can perform a
Reset All operation, as explained in "Reset Menu" on page 188.
Resetting the printer erases all print jobs. Make sure the Ready
light is not flashing when you reset the printer.
Network Menu
See the Administrator's Guide for each setting.
AUX Menu
See the Administrator's Guide for each setting.
is selected, more memory is
is selected, more memory
Functions of the Control Panel
6
6
6
6
6
6
6
6
6
6
6
6
191