Installing The System Into A Rack; Separating The Sections Of The Rack Rails - Supermicro SUPERSERVER 6028TP-HTR User Manual

SUPERSERVER 6028TP-HTR/HTTR/HTFR USER'S MANUAL
2-5

Installing the System into a Rack

This section provides information on installing the SC827HQ+ chassis into a rack
unit with the quick-release rails provided. There are a variety of rack units on the
market, which may mean the assembly procedure will differ slightly. You should
also refer to the installation instructions that came with the rack unit you are using.
NOTE: This rail will fit a rack between 26" and 33.5" deep.

Separating the Sections of the Rack Rails

The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of two sections: an inner fixed chassis rail that secures directly
to the server chassis and an outer fixed rack rail that secures directly to the rack
itself (Figure 2-1).
1
1
Rail Assembly
Extending the Rails
1
2
1
3
1
4
Warning: do not pick up the server with the front handles. They are
designed to pull the system from a rack only.
Figure 2-1. Separating the Rack Rails
Quick-Release Tab
Separating
the Inner Rail
Extension
2-4
Separating the Inner and Outer
Rails
1. Locate the rail assembly in the
chassis packaging.
2. Extend the rail assembly by
pulling it outward.
3. Press the quick-release tab.
4. Separate the inner rail
extension from the outer rail
assembly.