Table of Contents
Advertisement
3-4
Drive Carrier LEDs
The server chassis uses SATA drives.
SATA Drives
Each SATA drive carrier has two LEDs.
•
Blue: Each Serial ATA drive carrier has a green LED. When illuminated, this
green LED (on the front of the SATA drive carrier) indicates drive activity. A
connection to the SATA backplane enables this LED to blink on and off when
that particular drive is being accessed.
•
Red: The red LED to indicate an SATA drive failure. If one of the SATA drives
fail, you should be notified by your system management software.
SAS Drives
This server system does not support SAS drives at this time.
Chapter 3: System Interface
3-3
Advertisement
Table of Contents
