Cabletron Systems TRBMIM User Manual page 99

specifying in the Ring Security
screen 4-14
Ring out ports, converted from lobe
ports 5-10
Ring Security
Security Mode (Alarm Only) 4-14
Security Mode
(Alarm/Remove) 4-15
Security Mode (Disabled) 4-14
Ring Security screen
Interface field 4-14
Security Mode field 4-14
Stn Edit field 4-16, 4-17
Ring status
beaconing 6-6
closed 6-6
contention 6-6
lobe fail 6-6
normal 6-6
purge 6-6
unknown 6-6
Root bridge 4-24
S
Screen fields 3-3
Screen messages 3-4
Single Route Broadcast (SRB) frame
applying hop count limits to 4-20
see also Bridge Setup screen
Single Route Broadcast (SRB) mode,
specifying mode 4-22
SNMP Community Names
screen 4-9
SNMP Tools screen
Community Name field 8-2
Cycles command, viewing MIB
variables with 8-4
Get (F6) command, retrieving a
value from a single MIB
variable with 8-3
GetNext, retrieving the next
variable with 8-3
OID Prepend, specify a numerical
prefix for MIB variables
with 8-2
Recall Object identifiers (OID)
command, retrieving last
used 8-3
Repeat command, retrieving MIB
variables with 8-4
Step command, viewing MIB
variables with 8-4
SNMP Traps screen
number of trap destinations 4-11
setting and enabling traps 4-12
Spanning Tree Algorithm, enabling
and disabling 4-22
Statistics screens
specifying counter mode for Bridge
Setup 7-1
specifying counter mode for Device
Statistics 6-2
Super-User Community Name, LM
access privileges 4-10
System Level screen
ABRP Number of Retries
field 4-7
ABRP Retry Interval field 4-7
Enable Beacon Recovery
field 4-5, 4-6
IP Address field 4-4
Locally Administered field 4-8
Subnet Mask field 4-4
System Date field 4-3
T
Telnet 2-8
Toggle fields described 3-3
Traps
device-generated 4-11
V
VT-series terminal 2-1, 2-4
connecting to the Console port 2-1
setup parameters 2-4
INDEX
IX-5