Operational Modes And Lm Access - Cabletron Systems TRBMIM User Manual

Local management

Table of Contents

INTRODUCTION

1.5 OPERATIONAL MODES AND LM ACCESS

The number of LM applications you can access is contingent upon which

operational mode you have speciﬁed for the TRBMIM/TRBMIM-T. The

TRBMIM/TRBMIM-T can be conﬁgured to operate as a dedicated

Source-Route bridge or as a combination bridge and Token Ring

management module. See the TRBMIM-T User's Guide included with

the TRBMIM-T and the TRMM, TRBMIM, & TRMMIM Installation

Guide included with the TRBMIM for information about operational

mode speciﬁcations and selecting an operational mode.

The title of a LM screen indicates the current operating mode of the

TRBMIM/TRBMIM-T.

When the TRBMIM/TRBMIM-T is in the Bridge-Only mode, the LM

screen displays this title:

"TRBMIM BRIDGE LOCAL MANAGEMENT"

When the TRBMIM/TRBMIM-T is in the Bridge/Management mode, the

LM screen displays this title:

"TRBMIM CHASSIS LOCAL MANAGEMENT"

Table 1-1 lists LM applications you can access when the

TRBMIM/TRBMIM-T is conﬁgured to operate in either operational

mode.

1-6

Table of Contents

Do you have a question about the TRBMIM and is the answer not in the manual?

Trbmim-t