Cabletron Systems TRBMIM User Manual page 91

Note that if '
ignored. If
issued for the OID string
• Press F9 to recall the last OID entered at the
then use the keyboard to modify that OID.
3. Press the Enter key.
If the variable is not supported by the TRBMIM/TRBMIM-T's MIBs,
the "
MIB_NO_INSTANCE
displays information for that variable's data type, length, and value.
Figure 8-2 provides data from a sample Get operation
(internet -> mgmt -> mib-2 -> system -> sysDescr). Note that the
information displayed is similar to the information displayed by a
GetNext or Step operations.
DATA LENGTH: 34
DECODED DATA: Cabletron TRBMIM Revision X.XX.XX
Figure 8-2 Sample Output from a Get, GetNext, or Step Operation
To get the next variable:
1. Select
GETNEXT
The
<GETNEXT> OID (=|F9)
2. Type in the OID, or type the part of the OID following the prepend, at
the field and then press Enter.
If no instance of the variable exists, the "
message appears; otherwise the screen displays information for that
variable's data type, length, and value.
You can also use the F9 Recall command key to access the
NOTE
last OID used.
' is typed followed by an OID string, the prepend is
=
is entered at the
=4.1.3
" message appears; otherwise, the screen
ACCESSED OID: 1.3.6.1.X.X.X.X
ASCII LABEL: N/A
DATA TYPE: 0X2 {Str}
, and then press Enter (or press F8).
SNMP TOOLS SCREEN
<GET> OID
.
4.1.3
field appears.
MIB_NO_INSTANCE
field, a get is
field, and
<GET> OID
"
8-5