Table of Contents
Advertisement
DEVICE SETUP MENU
4.6.2 Enabling Frame Forwarding
You can use the
field to enable or disable
FRAME FORWARDING ACTIVE
the TRBMIM/TRBMIM-T ability to forward frames through the bridge
Station port.
is the default setting for the field.
ENABLED
To enable or disable frame forwarding:
1. Select the
field.
FRAME FORWARDING ACTIVE
2. Use the Enter key to choose an option.
3. Select
, and then press Enter.
SAVE
The "
" message appears.
CONFIG SAVED OK
The next chapter describes how to configure logical FNB connections and
enable and disable ports in the MMAC. It also describes how to monitor
system components.
4-27
Advertisement
Table of Contents
Need help?
Do you have a question about the TRBMIM and is the answer not in the manual?