Monitor Mode - Linkcom DoorPhone User Manual

4.2.1. Monitor mode

Linkcom France
11 rue du Soleil Levant 92140 CLAMART
Before programming the
paramters, you must stop the
GSM DoorPhone.
For monitoring operation don't
press Stop, the GSM
DoorPhone must be running!
Identification of serial line
connection
After GSM DoorPhone
voice connection, will
show voltage.
After GSM DoorPhone
voice connection, will
show GSM signal strength
After click to button monitor is shown GSM
DoorPhone operation (when operation is
not stopped by button STOP)
Record savings from monitor to file (for
service purposes – record sending)
Copyright © 2011 – Linkcom – All rights reserved
11