Table of Contents
Advertisement
LED Indicators
The LED indicators of the Switch include Power,
Console, and Link/Act. The following shows the LED
indicators for the Switch along with an explanation of
each indicator.
Power This indicator on the front panel should be
colored amber during the Power-On Self Test
(POST). It will light green approximately 2 seconds
after the switch is powered on to indicate the ready
state of the device. The LED will blink green while
downloading new software for the switch, or if the
system's configuration has changed and will light
yellow when an error occurs.
RDP in use When link with redundant power supply,
the "RDP in use" LED will blink in orange.
Act/Link These indicators are located to the left of
each port.
connection (or link) to a device at any of the ports.
The LEDs blink whenever there is reception or
transmission (i.e. Activity--Act) of data occurring at a
port.
Feature Summaries
The following summaries describe VH-2402-L3 features in
areas such as standards compliance, functionality,
performance, and options.
Local Console Management
A local console is a terminal or a workstation running a
terminal emulation program that is connected directly
to the switch via the RS-232 console port on the front
of the switch. A console connection is referred to as an
9033693-01
Figure 1-9. The LED indicators
They are lit when there is a secure
29
Advertisement
Table of Contents
