Table of Contents
Advertisement
Rear Panel
The rear panel of the switch consists of a slot for the
optional Redundant Power Supply and an AC power
connector.
The AC power connector is a standard three-pronged
connector that supports the power cord. Plug-in the
female connector of the provided power cord into this
socket, and the male side of the cord into a power
outlet. Supported input voltages range from 100 ~
240 VAC at 50 ~ 60 Hz.
Side Panels
The right side panel of the Switch contains two system
fans (see the top part of the diagram below). The left
side panel contains heat vents.
The system fans are used to dissipate heat. The
sides of the system also provide heat vents to serve
the same purpose. Do not block these openings, and
leave at least 6 inches of space at the rear and sides
of the switch for proper ventilation. Be reminded that
9033693-01
Figure 1-2. Rear panel view of the Switch
Figure 1-3. Side panel views of the Switch
26
Advertisement
Table of Contents
