Lanview Leds - Enterasys SmartSwitch 6G302-06 Installation Manual

Using LANVIEW
Table 4-1 describes the LED indications and provides recommended actions as appropriate.
NOTE: The terms flashing, blinking, and solid used in
Flashing indicates an LED is flashing randomly.
Blinking indicates an LED is flashing at a steady rate (approximately 50% on, 50% off).
Solid indicates a steady LED light. No pulsing.
Table 4-1 LANVIEW LEDs
LED Color
CPU Off
Red
Amber
Green
Amber
and
Green
4-2 Troubleshooting
State
Power off.
Blinking. Hardware
failure has occurred.
Solid. Resetting, normal
power up reset.
Blinking. Crippled.
Solid. Testing.
Solid. Functional.
Booting. Blinks amber
and green while booting.
Table 4-1
Recommended Action
Ensure chassis has adequate power.
Contact Enterasys Networks for technical
support.
If the LED remains red for several minutes,
contact Enterasys Networks for technical
support.
Contact Enterasys Networks for technical
support.
If the LED remains amber for more than
several minutes, contact Enterasys
Networks for technical support.
None.
None.
indicate the following: