Connecting to the Network
Figure 3-12
Between Switches and End-User Devices
1 RJ45 device port
2 Other device port
d. Ensure that the twisted pair connection meets the dB loss and cable specifications
6.
Repeat steps 1 through 5 above, until all connections have been made.
3-20 Installation
Eight-Wire Straight-Through Cable RJ45 Pinouts, Connections
À
outlined in the Cabling Guide. Refer to "Related Documents" on page xvii for
information on obtaining this document. If there is still a problem, contact
Enterasys Networks. Refer to "Getting Help" on page xviii for details.
Note: If a link has not been established, refer to
details. If the problem persists, refer to
contacting Enterasys Networks for support.
Á
Â
3 RJ45-to-RJ45 straight-through cable
Chapter 4
" on page xviii for details on
"Getting Help
for LED troubleshooting