Panview & Zoom; Settings - CDVI 2EASY CDV-96KP Manual

6] PANVIEW & ZOOM
Note: This function requires a monitor with fish-eye function to operate. (CDV-47 or
CDV-47DX)
You can adjust the image display of a fish-eye door station when answering a call by
using the 5-direction pad button.
When a door station image is displayed,
move to the desired position by touching
on the screen to view the
image in zoom mode.
Note: The edge of pantilt image will not be
displayed.
You can zoom in or zoom out to identify anyone at the entrance.
Touch the icon to zoom to the center position.
Pressing any button of the
5-direction pad will enlarge
the screen to full screen
mode.

7] SETTINGS

The table below explains the settings of each function.
• Enter the master code to open the programming mode
• Enter the corresponding setting code to perform the required function.
• Enter the value required using the setting codes below.
• Press "*" to exit the setting mode.
8
CDV-96KP
2EASY 2-wire Video Door Station with Keypad
Press to return to the full
screen mode
Press to navigate
and see individuals up close.
EN