Table of Contents
Advertisement
CIP Training L5160/L5130
Basic Operation
Performing Head Cleaning
1. Press the [Maintenance] key.
2.
Press [Nozzle Cleaning].
3.
Press [Nozzle Cleaning: Low] or [Nozzle Cleaning: High].
4.
Select which print heads to clean from [Head 1], [Head 2], or [Head 3], and then press
[Execute].
You can select multiple print heads simultaneously. To perform all print heads, press [Clean
All Print Heads].
5.
After the message is displayed, press [Execute].
Head cleaning will be performed.
6.
Press [Confirm].
7.
Press [Close].
8.
Perform test printing again to check the printing result.
Perform cleaning and test printing repeatedly until the printing result is normal.
DWU102
Advertisement
Table of Contents
