Ricoh L5160 Cip Training page 12

CIP Training L5160/L5130
Basic Operation
Adjusting the Media Feed Quantity Automatically
The machine prints the test pattern of the media feed adjustment, and then
adjusts the media feed quantity automatically.
1. Press the [Standard Procedure] key.
2. Press [Media Feed Adjustment].
3. Press [Auto].
4. Select a print mode from [6 Pass] or [8 Pass / 12 Pass / 16 Pass / 32 Pass].
If using the machine with white ink, select a print mode from [6 Pass], [8 Pass / 12 Pass / 16
Pass], or [32 Pass / 12 Pass (White)].
5. Press [Execute].
The test pattern of the media feed adjustment is printed, and then the media feed
quantity adjustment is performed.
6. Press [Confirm].
7. Press [End].
Adjusting the Media Feed Quantity Manually
You can print the test pattern of the media feed adjustment, and then adjust the media feed
quantity manually.
• If the control panel is not used for 30 minutes, the adjustment value entry menu is
canceled and the Home screen returns. If this happens, carry out the adjustment procedure
again from the beginning.
1. Press the [Standard Procedure] key.
DWU103
DWU103