CIP Training L5160/L5130
Basic Operation
8.
Press [On].
9.
Press [Close] twice.
10.
Press [End].
Performing the Connection Method for the Print Heads Manually
If image quality defects cannot be reduced even after performing the connection method for the
print heads automatically or you want to adjust visually, perform the connection method for the
print heads manually.
When using transparent or colored media, perform the connection method for the print heads
manually.
1. Press the [Standard Procedure] key.
2. Press [Selected Setting for Head Alignment].
3. Press [Print Head Alignment].
4. Press [Manual].
5. Press [Execute].
The test pattern of the print head alignment is printed.
6. Check the optimal mode based on the printing result of the test pattern of the print head
alignment.
Determine which test pattern has the least visible line, and use the letter on the left of the
test pattern to identify the optimal mode. In the following example, [A] has the least visible
line and is therefore optimal.
DWU103