Ricoh L5160 Cip Training page 22

CIP Training L5160/L5130
Basic Operation
• Before adjusting, ensure that there is no media floating or skewing. If such issues occur, feed
the media from the [Origin Setting] screen to reset the media or to resolve the skewing.
• Before adjusting, ensure that the heaters reach a temperature appropriate for use.
• If nozzle clogging or bending lines occur, the machine cannot perform the adjustment
successfully. We recommend performing head cleaning before adjusting.
• This machine cannot execute print-head alignment automatically for transparent or colored
media. Perform it manually. For details, see "Performing the Connection Method for the Print
Heads Manually".
• When using white ink, you cannot perform print-head alignment. Set [Print Head Alignment]
to
[Off].
Performing the Connection Method for the Print Heads
Automatically
Performs image processing automatically in the connection parts between each
head. Performing the connection method for the print heads can reduce image
quality defects if the defects appear in the connection parts between each head.
1. Press the [Standard Procedure] key.
2. Press [Selected Setting for Head Alignment].
3. Press [Print Head Alignment].
4. Press [Auto].
5. Press [Execute].
The test pattern of the print head alignment is printed, and then the connection
method for the print heads is performed.
6. Press [Confirm].
7. Press [Print Head Alignment].
DWU103