Table of Contents
Advertisement
Cleaning Print Head Nozzles
This section explains how to handle print heads. For details about how to maintain the machine
periodically, see Requests for Daily Care and Maintenance.
About Head Cleaning
If a printing problem is not resolved even when you have performed cleaning, perform cleaning again.
If the printing problem is still not resolved even after performing cleaning three times, see page 86 "If
Nozzle Clogging is Not Resolved".
If the white, clear, or primer ink is installed but it is not used, perform head cleaning once a day.
Performing Head Cleaning According to the Test Printing Result
Head cleaning means discharging a small amount of ink from the print heads and wiping off
unnecessary ink with a wiper. You can remove unnecessary ink and clear ink clogging by cleaning the
print heads. Perform cleaning repeatedly until the printing result becomes normal.
1.
Confirm that the carriage is located in the home position.
If not, click [Home] on the toolbar.
2.
Click the [Maintenance] tab on the toolbar.
3.
Select the types of ink subject to cleaning and click [Clean].
When several types of ink are selected, cleaning is applied to the selected colors in turn.
• If the ink configuration is set to "Standard Ink Config"
• If the ink configuration is set to "Double White Ink Config"
Cleaning Print Head Nozzles
51
Advertisement
Table of Contents
