Table of Contents
Advertisement
4.1
Before you Begin
To facilitate the installation of the enhanced display device drivers and utility soft-
ware, you should read the instructions in this chapter carefully before you attempt
installation. The device drivers for the PCA-6008 board are located on the software
installation CD. The auto-run function of the driver CD will guide and link you to the
utilities and device drivers under a Windows system. The Intel® Chipset Software
Installation Utility is not required on any systems running Windows NT 4.0. Updates
are provided via Service Packs from Microsoft*.
Note!
The files on the software installation CD are compressed. Do not
attempt to install the drivers by copying the files manually. You must use
the supplied SETUP program to install the drivers
Before you begin, it is important to note that most display drivers need to have the
relevant software application already installed in the system prior to installing the
enhanced display drivers. In addition, many of the installation procedures assume
that you are familiar with both the relevant software applications and operating sys-
tem commands. Review the relevant operating system commands and the pertinent
sections of your application software's user's manual before performing the installa-
tion.
4.2
Introduction
The Intel® Chipset Software Installation (CSI) utility installs to the target system the
Windows INF files that outline to the operating system how the chipset components
will be configured. This is needed for the proper functioning of the following features:
• Core PCI and ISA PnP services.
• AGP support.
• IDE Ultra ATA 100/66/33 and Serial ATA interface support.
• USB 1.1/2.0 support
• Identification of Intel® chipset components in the Device Manager.
•Integrates superior video features. These include filtered sealing of 720 pixel
DVD content, and MPEG-2 motion compensation for software DVD
Note!
This utility is used for the following versions of Windows system, and it has to
be installed before installing all the other drivers:
Windows 2000
Windows NT
Windows XP
4.3
Windows XP Driver Setup
1.
Insert the driver CD into your system's CD-ROM drive. In a few seconds, the
software installation main menu appears. Move the mouse cursor over the
"Auto" button under the "CSI UTILITY" heading.
PCA-6008G2 User Manual
46
Advertisement
Table of Contents
