Hinging The Elevator; Hinging The Rudder - Seagull Models SEA231 Assembly Manual

Monocoupe 110 Special
.

HINGING THE ELEVATOR.

Glue the elevator hinges in place using
the same techniques used to hinge the ai-
lerons.

HINGING THE RUDDER.

Glue the top two rudder hinges in place
using the same techniques used to hinge
the ailerons.
The lower hinge will be glued when the
fin/rudder assembly is attached to the fu-
selage.
8
INSTALL ELEVATOR CONTROL HORN.
Fiberglass control horn.
.
Elevator fiberglass control horn.
Instruction Manual.
Epoxy.
Epoxy.