Seagull Models SEA231 Assembly Manual page 15

4) Attach the motor to the front of the
electric motor box using four 4mm blind
nut, four M3x12mm hex head bolts to se-
cure the motor. Please see picture shown.
Blind nut.
WWW.SEAGULLMODELS.COM
4 mm
Epoxy
5) Attach the speed control to the side
of the motor box using two-sided tape
and tie wraps. Connect the appropriate
leads from the speed control to the mo-
tor. Make sure the leads will not interfere
with the operation of the motor.
4x15mm
Speed control.
15