Table of Contents
Advertisement
KINO-AQ170 Industrial Motherboard
4.4 Socket LGA1151 Cooling Kit Installation
WARNING:
DO NOT attempt to install a push-pin cooling fan.
The pre-installed support bracket prevents the board from bending and
is ONLY compatible with captive screw type cooling fans.
WARNING:
Do not wipe off (accidentally or otherwise) the pre-sprayed layer of
thermal paste on the bottom of the heat sink. The thermal paste
between the CPU and the heat sink is important for optimum heat
dissipation.
The cooling kit can be bought from IEI. The cooling kit has a heatsink and fan. To install
the cooling kit, follow the instructions below.
Step 1:
A cooling kit bracket is pre-installed on the solder side of the motherboard.
See Figure 4-5.
Figure 4-5: Cooling Kit Support Bracket
Page 61
Advertisement
Table of Contents
