Auto Input(S) Sensing Feature - LG 32LY770M Commercial Mode Setup Manual

This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS.
Note: When both item 042 AUTO INPUTS and item 041 SIMPLINK EN are enabled in the Installer Menu,
HDMI inputs will be detected by SIMPLINK, but the Auto Input(s) Sensing Feature will not function.
In the Installer Menu, an informational code is displayed at the right of each Auto Inputs value, for example:
xxLY770M PTC INSTALLER MENU
CPU-CTV
042 AUTO INPUTS
UPN 000-000-000-000
PTC V#.##.###
Each code consists of eight characters that identify the Aux input(s) for which auto-sensing is enabled.
The following table identifies the Installer Menu display code Input # for each Aux input that is available on
the LY770M TV models. The table also identifies the Installer Menu item associated with each Aux input.
Remember that in order for auto-sensing to be enabled for an input, that input must also be enabled in the
Installer Menu.
Installer Menu Aux
Display Code Input
Input #
0 AV
6 HDMI 1
7 HDMI 2
To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available
Aux inputs, set item 042 to 255. All other available settings (i.e., settings for individual inputs) are listed in the
table below.
Item 042
Value
AV
001 Enabled
064 Disabled
065 Enabled
128 Disabled
129 Enabled
192 Disabled
193 Enabled
X = Aux input source is Disabled or Not Available (i.e., on these TV models)
D = Auto-sensing for input is Disabled
Input # = Auto-sensing for input is Enabled
206-4271
193 76XXXXX0
ASIC D279
CPU V#.##.##.##
Installer Menu
Item Function
039 REAR AUX EN
035 HDMI1 ENABLE
091 HDMI2 ENABLE
Inputs
HDMI 1 HDMI 2
Disabled Disabled
Enabled Disabled
Enabled Disabled
Disabled Enabled
Disabled Enabled
Enabled Enabled
Enabled Enabled
Reference: Auto Input(s) Sensing Feature
AUTO INPUTS Display Code
This example illustrates Installer Menu item 042 value
193, which enables auto-sensing for all available Aux
inputs. The input #s in the display code (7, 6, 0 in this
example) identify the enabled Aux inputs. See table
below for a listing of the LY770M Aux inputs and their
corresponding display code input #s. The second
table below shows the display codes for all item 042
values.
Installer Menu
Display
DDXXXXX0
D6XXXXXD
D6XXXXX0
7DXXXXXD
7DXXXXX0
76XXXXXD
76XXXXX0
81