Ip Environment Setup; Accessing The Ip Environment Menu; Pro:centric Setup - LG 32LY770M Commercial Mode Setup Manual

Hide thumbs Also See for 32LY770M:

Owner's manual (24 pages)

100

101

102

103

104

Table of Contents

The IP Environment Menu enables you to set up the network features of the TV. If you intend to

create a Master TV Setup for cloning purposes (see Master TV Setup procedure on pages 46 to

48), all IP Environment settings, with the exception of Wired Network Connection settings and the

TV name (editable in the Media Share Menu), may be cloned.

Note: With the exception of Network Setting configuration, the IP Environment settings are editable

(with the Installer Remote) only if the TV is in Pass-through Mode and read-only when the TV is not

in Pass-through Mode.

Accessing the IP Environment Menu

Note: When you enter the IP Environment Menu, the Installer Menu is exited (all current settings

are saved automatically upon exit). If you are also in the process of updating Installer Menu items,

you may wish to set all items as needed before you access the IP Environment Menu. Otherwise,

after exiting the IP Environment Menu, you will need to reaccess the Installer Menu to set additional

items.

1. Use the Installer Remote to access the Installer Menu (see "Accessing the Installer Menu" on page

35 for further information).

2. Navigate to Installer Menu item 119 DATA CHANNEL, and press 2-5-3 + MENU to launch the IP

Environment Menu.

Use the Up/Down arrow keys on the Installer Remote to select the desired menu option and then

press OK. Refer to the following sections for information on each of the IP Environment setup options.

When you have completed your IP Environment configuration as required, press EXIT or

the Installer Remote to exit the IP Environment Menu.

Pro:Centric Setup

Pro:Centric options enable you to configure the TV with the

appropriate settings to connect to the Pro:Centric server. Use the Up/

Down arrow keys on the Installer Remote to navigate between fields.

1. With the IP Environment Menu on display, use the arrow keys

on the Installer Remote to select the Pro:Centric menu option.

Then, press OK.

2. Refer to the appropriate subsection(s) below to configure the

TV's Pro:Centric settings to match those of the Pro:Centric

server.

While the Pro:Centric application (Mode) itself is an additional

feature, the appropriate Pro:Centric server configuration must

be completed to enable TV E-Z Installation (splash screen,

configuration, and software/firmware) data downloads and, if

configured, the Pro:Centric application download.

Note: By default, the Pro:Centric Menu initially shows RF

configuration fields. When you select "IP" as the Media Type, the

Data Channel field is replaced with IP Address and Port Number

fields.

206-4271