LG 32LY770M Commercial Mode Setup Manual page 86

Reference: Using the TV's Zoning Features (Cont.)
Note: While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one
Zone. See also the FTG Channel Map Editor overview on page 63.
At the same time, keep in mind that the TV Zone designations are not mutually exclusive. That is, you may
opt to place Zone restrictions on selected channels in the FTG Channel Map, but at the same time, you can
choose to configure all TVs at the site with the same Installer Menu and/or TV Setup Menu settings. For
example, an FTG Configuration (.tlx) file being used to configure the TVs at a site may contain multiple
Installer Menu and TV Setup Menu profiles with different Zone assignments, as well as an FTG Channel
Map with Zone restrictions on several channels. Each TV that still has the default TV Zone 0 setting will only
be configured by the Installer Menu and/or TV Setup Menu profile(s) with a Zone 0 designation. If, on the
other hand, the TV Zone # is set to 1, the TV will first look in the file for the LY770M Installer Menu and/or
TV Setup Menu profile(s) with a Zone 1 designation. If none of the LY770M Installer Menu and/or TV Setup
Menu profiles has a Zone 1 designation, the TV will then look for the LY770M profile(s) with a Zone 0
designation. For the FTG Channel Map configuration, when the TV Zone # is set to 0, the TV will ignore
any Zone restrictions (1–8) that may be placed on channels in the FTG Channel Map. However, when
the TV Zone # is set to 1, the TV will omit any channels that have been restricted from Zone 1 in the FTG
Channel Map.
Using the TV Zoning Feature with Cloning Configuration
A location-specific configuration / TLX file may be saved (Learned) from an individual TV as part of a Master
TV Setup and then be used during Teaching. For example, if the TV Zone # in the Master TV is set to 3
before Learning is initiated, the Master TV's Installer Menu and TV Setup Menu profiles will be saved with
the TV Zone 3 assignment when Learning is completed. In order to configure the Target TVs with the Zone 3
Installer Menu and TV Setup Menu profiles Learned from the Master TV, you must set the TV Zone #
accordingly in the Target TVs before transferring (Teaching) the Master TV Setup. See "Set the TV Zone #
and/or Wi-Fi Zone # in the TV" on the following page. Also, see "Cloning Procedures" on pages 53 to 58
for additional information on the cloning processes. TV Zone 0 is the default TV Zone #.
Wi-Fi Zoning Feature
The Wi-Fi Zoning feature enables you to use a TLX file to configure an individual TV or group of TVs with
a particular Wi-Fi access point's login data to create "Wi-Fi Zones" within the installation environment.
Using the Wi-Fi Zoning Feature with FTG Mode via CPU Configuration
The FTG File Manager may be used to create an FTG Configuration (.tlx) file with an FTG Installer Menu
profile that contains login data for multiple Wi-Fi access points, each assigned a Wi-Fi Zone #. Up to 100
Wi-Fi Zones can be designated within each FTG Installer Menu profile, thus allowing for distribution of the
Wi-Fi network load. For example, if a site has 50 LY770M TVs within close proximity, you may wish to
create 10 Wi-Fi Zones, each with its own access point that has unique login data, so that no more than
five of the TVs are connected to one access point at any given time.
In order for a TV to be configured by the proper Installer Menu profile with the desired Wi-Fi access point
login data for wireless networking (i.e., SSID, security type, and security key), you must set both the TV
Zone # and the Wi-Fi Zone # in the TV (see "Set the TV Zone # and/or Wi-Fi Zone # in the TV" on the
following page for further information). If the Wi-Fi Zone # in the TV is set to 0 (default), the TV will not obtain
access point login data from the Installer Menu profile with which it is configured unless the profile contains
the global Wi-Fi Zone 100. Similarly, any TV that does not find its matching Wi-Fi Zone # in the TLX file, but
that does find the global Wi-Fi Zone 100, will be configured with the global access point login data.
Refer to the Free-To-Guest (FTG) File Manager User Guide for further information on defining Wi-Fi
Zones in the FTG File Manager.
86
206-4271