Auto Input(S) Sensing Feature - LG 65UW660H Commercial Mode Setup Manual

This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable
auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux
inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual
inputs), refer to the table on the following page.
Note: When both item 042 AUTO INPUTS and item 041 SIMPLINK EN are enabled in the Installer Menu,
HDMI inputs will be detected by SIMPLINK, but the Auto Input(s) Sensing Feature will not function.
In the Installer Menu, an informational code is displayed at the right of each Auto Inputs value, for example:
PTC INSTALLER MENU
xxUW660H
CPU - CTV
042 AUTO INPUTS
UPN 000-000-000-000
PTC V#.##.###
Each code consists of eight characters that identify the Aux input(s) for which auto-sensing is enabled.
The following table identifies the Installer Menu display code Input # for each Aux input that is available on
the UW660H TV models. The table also identifies the Installer Menu item associated with each Aux input.
Remember that in order for auto-sensing to be enabled for an input, that input must also be enabled in the
Installer Menu.
Installer Menu
Aux
Display Code
Input
Input #
0 AV
6 HDMI 1
7 HDMI 2
5 HDMI 3
206-4297
225 765XXXX0
SW 5331 7F60
CPU V#.##.##.##
Installer Menu
Item Function
039 REAR AUX EN
035 HDMI1 ENABLE
091 HDMI2 ENABLE
092 HDMI3 ENABLE
Reference: Auto Input(s) Sensing Feature
AUTO INPUTS Display Code
This example illustrates Installer Menu item 042 value
225, which enables auto-sensing for all available Aux
inputs. The input #s in the display code (7, 6, 5, 0 in
this example) identify the enabled Aux inputs. See
table below for a listing of the UW660H Aux inputs
and their corresponding display code input #s. The
table on the following page shows the display codes
for all item 042 values.
69