Ez-Manager Wizard; Initiate The Ez-Manager Wizard - LG 32LY770M Commercial Mode Setup Manual

EZ-Manager Wizard

Initiate the EZ-Manager Wizard

After you select the "EZ-Manager" option from the Setup Wizard Welcome screen, an EZ-Manager
Welcome screen provides a brief introduction to the EZ-Manager Wizard.
Note: Each EZ-Manager Wizard step is allotted a time frame after which the wizard proceeds
without user interaction. If the Pro:Centric server is configured on the system and if no location-
specific settings are required in the TV, for example, TV Zone, Wi-Fi Zone, Label, and/or Room
Number settings, from this point, the wizard can proceed through each of the configuration steps
with no further user interaction.
WELCOME TO LG'S EZ-MANAGER WIZARD
. Use this setup wizard to configure the TV for Pro:Centric and/or Free-To-Guest (FTG) operation.
Select NEXT to continue.
. If a Pro:Centric Server will not be installed and/or you do not wish to use the wizard to configure this TV for FTG
Mode, you may exit the wizard.
Select NO PRO:CENTRIC to disable the Pro:Centric feature of this TV, or select EXIT to quit.
This setup wizard will start automatically in 10 seconds.
Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the next
configuration step. Once the wizard has proceeded, it is not possible to return to the EZ-Manager
Welcome screen; however, if you simply wish to exit the wizard, you can do so by selecting the
"EXIT" button from the subsequent screen(s).
From the EZ-Manager Welcome screen, you have the following options:
• To proceed with the EZ-Manager Wizard, use the arrow keys on the Installer Remote to select
NEXT, and then press OK. Then, continue to the "TV Configuration Options" section on the
following page.
• To exit the EZ-Manager Wizard, but retain the use of the Pro:Centric remote management
feature on this TV (i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, use
the arrow keys on the Installer Remote to select EXIT, and then press OK. In the confirmation
pop-up window, select OK, and then press OK once more on the Installer Remote.
• If you do not intend to install a Pro:Centric server on this system and you do not wish to use the
wizard's Zoning or USB configuration options, exit the wizard as follows: Use the arrow keys
on the Installer Remote to select NO PRO:CENTRIC, and then press OK. This will disable the
Pro:Centric feature of this TV (i.e., Installer Menu item 119 DATA CHANNEL will be set to 0) and
exit the wizard. In the confirmation pop-up window, select OK, and then press OK once more on
the Installer Remote.
14
NO PRO:CENTRIC EXIT NEXT
206-4271