Commercial Mode Overview; Setup Checklist; Pass-Through Mode - LG 32LY770M Commercial Mode Setup Manual

Commercial Mode Overview

This document describes how to set up LY770M Pro:Centric
LG commercial TV functionality is based on "ownership" of the Channel Map; that is, the Channel Map
resides in the TV's CPU, Protocol Translation Controller (PTC), or embedded b-LAN™ (EBL) module, or
it resides externally from the TV (i.e., in a device from the solution provider).
These TV models are capable of Free-To-Guest (FTG) Mode operation via the TV CPU. Alternatively, the
EBL module can be configured either for Pass-through Mode (default) or FTG Mode. When neither the CPU
nor EBL is in FTG Mode, these TV models also allow external control via the TV's MPI port.

Setup Checklist

Note: This document provides information specific to Commercial Mode operation. Refer to the Owner's
Manual for information on TV installation and hardware and cable connections.
Installation
__ Unpack TV and all accessories.
__ Install batteries in the Installer Remote.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount
or stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.

Pass-through Mode

This mode allows you to configure individual TVs for Pro:Centric and/or FTG Mode via CPU operation
or create a Master TV Setup for cloning purposes. This mode also allows external control via the GAME
CONTROL/MPI port on the TV rear jack panel.
There are three methods for configuring individual TVs that are currently in Pass-through Mode: using
one of two LG Setup Wizard options or using the Custom Master TV Setup procedure as described in this
document.
LG Setup Wizard Configuration
When the TV is in a factory default state, the LG Setup Wizard provides the following two configuration
options:
• The EZ-Manager Wizard provides automated or manual options for configuring essential items for
Pro:Centric operation and also provides an option for using a USB memory device to configure the TV.
Use the Installer Remote to make selections and complete each step.
• The Express Script provides limited customization of the TV features and Installer Menu items, confined
to those that are essential to most hospital TV viewing applications.
See "LG Setup Wizard" on pages 12 to 13 for further information.
Custom Master TV Setup
The Custom Master TV Setup procedure enables you to create a customized Master TV Setup for
Pass-through Mode or FTG Mode via CPU configuration purposes. Use the Installer Remote to configure
Installer Menu items as required for TV operation and set up TV features (Channel, Picture, Sound, etc.).
See "Custom Master TV Setup" on pages 46 to 48 for detailed information.
6
®
TVs for Commercial Mode operation.
Cable Connections
__ Make all rear jack panel connections, as
appropriate.
Commercial Mode Setup
__ Complete appropriate procedures as described
in this document for Commercial Mode operation.
206-4271