Auto Input(S) Sensing Feature - LG Pro:Centric 32LT560H Setup Manual

This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable
auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux
inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual
inputs), refer to the table on the following page.
Note: When both item 042 AUTO INPUTS and item 041 SIMPLINK EN are enabled in the Installer Menu,
HDMI inputs will be detected by SIMPLINK, but the Auto Input(s) Sensing Feature will not function.
In the Installer Menu, an informational text code is displayed at the right of each Auto Inputs value, for
example:
PTC INSTALLER MENU
xxLT560H
CPU - CTV
042 AUTO INPUTS
UPN 000-000-000-000
PTC V#.##.###
Each Auto Inputs text code consists of eight characters that identify the Aux input(s) for which auto-sensing
is enabled. The following table identifies the Installer Menu text code input # for each Aux input that is
available on the LT560H TV models. The table also identifies the Installer Menu item associated with each
Aux input. Remember that in order for auto-sensing to be enabled for an input, that input must also be
enabled in the Installer Menu.
Input # Assignments
Installer Menu Aux
Display Code Input
Input #
0 AV
6 HDMI 1
7 HDMI 2
5 HDMI 3
206-4339
225 765XXXX0
ASIC D279
CPU V#.##.##.##
Installer Menu
Item Function
039 REAR AUX EN
035 HDMI1 ENABLE
091 HDMI2 ENABLE
092 HDMI3 ENABLE
Reference: Auto Input(s) Sensing Feature
AUTO INPUTS Display Code
This example illustrates Installer Menu item 042 value
225, which enables auto-sensing for all available Aux
inputs. The input #s in the text code (7, 6, 5, 0 in this
example) identify the enabled Aux inputs. See the Input
# Assignments table below for a listing of the LT560H
Aux inputs and their corresponding text code input #s.
The Auto Inputs Values table on the following page
shows the text codes for all item 042 values.
61