Commercial Mode Overview; Setup Checklist; Pass-Through Mode - LG Pro:Centric 32LT560H Setup Manual

Commercial Mode Overview

This document describes how to set up LT560H Pro:Centric
commercial TV functionality is based on "ownership" of the Channel Map; that is, the Channel Map resides
in the TV's CPU or Protocol Translation Controller (PTC) or it resides in a Pro:Centric application or an
external device from the solution provider.
These TV models support several different operational modes: LG's Free-To-Guest (FTG) Mode via the TV
CPU or Pass-through Mode (default). When in Pass-through Mode, these TV models can also be externally
controlled via Multiple Protocol Interface (MPI) or TV-Link Tuner (TLT) interface (RS-232C).

Setup Checklist

Note: This document provides information specific to Commercial Mode operation. Refer to the Owner's
Manual and/or Easy Setup Guide for information on TV installation and hardware and cable connections.
Installation
__ Unpack TV and all accessories.
__ Install batteries in the Installer Remote.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount
or stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.

Pass-through Mode

This mode allows you to configure individual TVs for Pro:Centric and/or FTG Mode operation. This mode
also allows external control via either the MPI port or the TLT (RS-232C) port on the TV rear jack panel.
There are two methods for configuring individual TVs that are currently in Pass-through Mode: either
using the EZ-Manager Wizard or the Custom Master TV Setup procedure as described in this document.
EZ-Manager Wizard
When the TV is in a factory default state, the EZ-Manager Wizard provides automated or manual options
for configuring essential items for Pro:Centric operation and also provides an option for using a USB
memory device to configure the TV. Use the Installer Remote to make selections and complete each step.
See "EZ-Manager Wizard" on pages 12 to 20 for detailed information.
Custom Master TV Setup
The Custom Master TV Setup procedure enables you to create a customized Master TV Setup for
Pass-through Mode or FTG Mode configuration purposes. Use the Installer Remote to configure Installer
Menu items as required for TV operation and set up TV features (Channels, Picture, Sound, etc.). See
"Custom Master TV Setup" on pages 35 to 37 for detailed information.
6
®
TVs for Commercial Mode operation. LG
Cable Connections
__ Make all rear jack panel connections, as
appropriate.
Commercial Mode Setup
__ Complete appropriate procedures as described
in this document for Commercial Mode operation.
206-4339