Commercial Mode Overview; Setup Checklist; Pass-Through Mode - LG Lodging Guest Interactive Pro: Centric 32LD660H Setup Manual

Commercial Mode Overview

This document describes how to set up LD660H/LD665H and LV555H Pro:Centric
Mode operation. LG commercial TV functionality is based on "ownership" of the Channel Map; that is,
the Channel Map resides in the TV's CPU, Protocol Translator Card (PTC), or embedded b-LAN™ (EBL)
module, or it resides externally from the TV (i.e., in a device from the solution provider).
Each of these TV models is capable of Free-To-Guest (FTG) Mode operation via the TV CPU. Alternatively,
the EBL module can be configured either for Pass-through Mode (default) or FTG Mode. When neither the
CPU nor EBL is in FTG Mode, these TV models also allow external control via the TV's MPI port.

Setup Checklist

Note: This document provides information specific to Commercial Mode operation. Refer to the Owner's
Manual for detailed information on TV installation and hardware and cable connections.
Installation
__ Unpack TV and all accessories.
__ Install batteries in the Installer Remote.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount
or stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.

Pass-through Mode

This mode allows you to create a Master TV Setup for cloning purposes for TVs that are to remain in Pass-
through Mode. This mode also allows external control via the GAME CONTROL/MPI port on the TV rear jack
panel. Use the Installer Remote to configure Installer Menu items as required for TV operation and set up TV
features (Channel, Picture, Audio, etc.). See "Master TV Setup" on pages 10 to 13 for detailed information.
Installer Menu
To create a Master TV Setup, you will need to know
how to access the commercial controller (PTC)
Installer Menu and make changes to the default
values as required. If necessary, familiarize yourself
with the Installer Menu and how to make and save
changes. Refer to pages 14 to 22 for information on
accessing the Installer Menu and for detailed
descriptions of the Installer Menu items.
TV Setup Menus
On-screen setup menus control the features of the
TV. Use the Installer Remote to access the TV setup
menus, and set the TV features to the desired
configuration for the end user. Refer to the Owner's
Manual for detailed information on the TV setup
menus.
6
Cable Connections
__ Make all rear jack panel and MPI card slot
connections, as appropriate.
Commercial Mode Setup
__ Complete appropriate procedures as described
in this document for Commercial Mode operation.
xxLD66xH PTC INSTALLER MENU
000 INSTALLER SEQ
UPN 000-000-000-000
PTC V1.00.022
Typical Installer Menu
CHANNEL
PICTURE
OPTION LOCK
TV Setup Menus
®
TVs for Commercial
CPU-CTV
000
ASIC D279
CPU V3.41.00
AUDIO TIME
INPUT USB
206-4200