Ez-Manager Wizard; Before You Begin; Initiate Configuration Or Exit The Ez-Manager Wizard - LG ProCentric 32LV570H Setup Manual

EZ-Manager Wizard

The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or
manual) of configuring the essential Installer Menu items for Pro:Centric operation. The wizard will
appear on the screen each time the TV is turned ON, until one of its configuration methods has
been completed or the wizard is exited. Use the Installer Remote to make selections and complete
each wizard step.
While the EZ-Manager Wizard is intended primarily for Pro:Centric-related confi guration, the
wizard also offers Zoning as well as USB confi guration options.
• LV570H TVs support the TV Zoning feature, which enables location-specifi c settings (see
Reference section, "Using the TV Zoning Feature," for further information). The EZ-Manager
Wizard enables you to set the TV Zone # in the TV as part of the confi guration process.
• The EZ-Manager Wizard also enables you to access the TV's standard TV Manager / USB
Download Menu as part of the confi guration process, if desired, to perform USB confi guration
and/or update functions.
Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if
applicable, the LAN cable during the confi guration process, as doing so will interrupt
the current step and may corrupt the confi guration data.

Before You Begin

• If you plan to create a Master TV Setup using the procedure described on pages 34 to 36, be sure
to exit the EZ-Manager Wizard in order to avoid setting modes that may restrict the custom setup
procedure. See also "Initiate Configuration or Exit the EZ-Manager Wizard" below.
• If it has been completed or exited and therefore does not display, the EZ-Manager Wizard can
be reactivated; however, this requires that you restore the TV to a factory default condition. See
Reference section, "Restoring Factory Defaults on the TV(s)," for further information.
• Each wizard step is allotted a time frame after which the wizard proceeds without user interaction.
If the Pro:Centric server is confi gured on the system and if no location-specifi c settings are
required in the TV, for example, TV Zone, Label, and/or Room Number settings, you can simply
turn ON the TV, and once initiated, the wizard will proceed through each of the confi guration steps
with no further user interaction.
• If any of the confi guration steps fails, you will see a "Diagnostics" screen with an indication of the
failure. You will then have the opportunity to reinitiate the confi guration process from the previous
screen or exit the EZ-Manager Wizard.
Initiate Confi guration or Exit the EZ-Manager Wizard
The Welcome screen provides a brief introduction to the EZ-Manager Wizard.
EZ-Manager Wizard
Welcome to LG's EZ-Manager Wizard
• Use the EZ-Manager Wizard to confi gure the TV for Pro:Centric operation
or to confi gure the TV using a USB memory device.
Select 'Next' to continue.
• If a Pro:Centric server will not be installed and/or you do not wish to use
the EZ-Manager Wizard to confi gure this TV, you may exit the wizard.
Select 'No Pro:Centric' to disable the Pro:Centric feature of this TV, or
select 'Exit' to quit.
This setup wizard will start automatically in 10 seconds.
No Pro:Centric
12
Exit Next
Note: If there is no user action in this screen within 10
seconds, the wizard will proceed to the fi rst confi guration
step. Once the wizard has proceeded, it is not possible
to return to the Welcome screen; however, if you simply
wish to exit the wizard, you can do so by selecting the
"Exit" option from the subsequent screen(s).
206-4317 Draft A.2