Ez-Manager Wizard; Tv Configuration Options - LG 55EU960H Setup Manual

Table of Contents

This section describes the EZ-Manager Wizard that is initiated when you select "Solution Settings"

from the First Use Wizard / Welcome screen.

Note: If the Pro:Centric server is configured on the system/network and if no location-specific

settings are required in the TV, for example, TV Zone, Wi-Fi Zone, Label, and/or Room Number

settings, you can simply turn ON the TV, and once initiated, the wizard will proceed through each

of the configuration steps with no further user interaction.

Note: Select the "BACK" button, where available, to check previous settings, as necessary. Also

note that if you turn OFF the TV while the EZ-Manager Wizard is in progress, when you turn the

TV back ON, a "Diagnostics" screen will be displayed (see also note below).

Note: If any of the configuration steps fails, you will see a "Diagnostics" screen with an indication

of the failure. You will then have the opportunity to reinitiate the configuration process from the

previous screen or exit the EZ-Manager Wizard.

TV Configuration Options

In the TV Configuration Options screen, you can choose how to proceed with the configuration of

this TV.

Note: If you intend to use the Zoning feature(s) on the TV for location-specific

configuration purposes, select the ZONES & ROOM NUMBER option from this screen

and set the appropriate TV Zone # and/or the Wi-Fi Zone # in the TV BEFORE you

continue with additional configuration.

TV CONFIGURATION OPTIONS

To configure the TV for Pro:Centric operation, select NEXT.

To set the optional Zoning features, select ZONES & ROOM NUMBER.

ZONES & ROOM NUMBER

To configure the TV using a USB memory device, select USB CONFIGURATION.

USB CONFIGURATION

To set up the network, select NETWORK SETTINGS.

NETWORK SETTINGS

NO PRO:CENTRIC

BACK

Note: If there is no user action in this screen within one minute, the wizard will automatically

continue to the next configuration step. If you would like to exit the wizard at any time, use the arrow

keys on the Installer Remote to select/highlight the

press the Wheel (OK) button. In the exit confirmation screen, select the appropriate "EXIT" option

(see also note below), and then press the Wheel (OK) button once more on the Installer Remote.

Note: If you choose to exit the EZ-Manager Wizard from this point on, you will have the option to

save any settings made by selecting SAVE & EXIT in the exit confirmation screen. Or, you can exit

the wizard without saving any settings by simply selecting EXIT in the confirmation screen.

206-4334

This wizard will continue automatically in 60 seconds.

button at the top right of the screen, and then