Safety Instructions; Table Of Symbols - LG MultiSITE CRC2 Series Installation Manual

Table of Contents

Advertisement

SAFETY INSTRUCTIONS

The instructions below must be followed to prevent product malfunction, property
damage, injury or death to the user or other people. Incorrect operation due to ignor-
ing any instructions will cause harm or damage. The level of seriousness is classi-
fied by the symbols below.

TABLE OF SYMBOLS

DANGER
WARNING
CAUTION
NOTE
Note:
DANGER
Risk of electric shock. Disconnect all power before servicing.
Do not touch any exposed wiring, terminals, or other electrical compo-
nents with tools or exposed skin. Only qualified technicians should install,
use or remove this unit.
Improper installation or use may result in fire, explosion, electric shock, physical injury
and/or death.
Do not use or store flammable gas or combustibles near the product.
There is risk of fire, explosion, and physical injury or death.
WARNING
The information in this manual is intended for use by a trained technician
familiar with the U.S. National Electric Code (NEC) who is equipped with the
proper tools and test instruments.
Failure to carefully read and follow all instructions in this manual may result in equipment
malfunction, property damage, personal injury and/or death.
Due to our policy of continuous product innovation, some specifications may change without notification.
4
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
This symbol indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
This symbol indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
This symbol indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
This symbol indicates situations that may result in equip-
ment or property damage accidents only.
This symbol indicates information related to the current
procedure.
This symbol indicates an action that should not be
performed.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multisite crc2Multisite crc2+zPremtbvc2Premtbvc3Premtbvc4

Table of Contents