LG MultiSITE CRC2 Series Installation Manual page 33

Ceiling/Wall Sensor Installation
1. Pull out the battery isolation strip.
2. Attach the sensor to a wall or ceiling, observing the following:
• Recommended ceiling mount height is 8.2 ft.
• Recommended wall mount height is 4 ft.
• For wall mounting, ensure that the base plate is attached to the wall with the TOP
arrow up.
• For wood or plastic surfaces, use either the adhesive pads or the mounting
screws. (If using screws, pre-drill a 1/32 in hole.)
• For metal surfaces, use the adhesive pads only. For ceiling mounting, using
screws is recommended.
3. Attach the sensor to the base plate.
• Insert the hooks on the base plate into the slots on the sensor.
• Turn the sensor body clockwise to lock the sensor to the base plate.
• An instruction is printed on the side of the sensor body to help with attachment.
• For wall mounted sensors the temperature and humidity sensor holes should be
at the bottom once the sensor is installed.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
ACCESSORIES INSTALLATION
Figure 38: Ceiling/Wall Sensor Installation
Ø 1/32 in
Ø 1/32 in
33