LG MultiSITE CRC2 Series Installation Manual page 18

ACCESSORIES INSTALLATION
6. Gently press the ZigBee Pro or
Wi-Fi module into the Remote
Controller's motherboard until
it fits snugly in place.
Do not press too hard to
avoid damage to ZigBee Pro or
Wi-Fi module.
7. Carefully replace Remote
Controller's motherboard into
casing.
8. Carefully align cover to top of
base and snap in place from
bottom (Figure 11).
9. Install security screw.
Due to our policy of continuous product innovation, some specifications may change without notification.
18
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Figure 10: Install ZigBee Pro or Wi-Fi Wireless
Figure 11: Reinstall Cover
Module